LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (24 Fuel System - Electronic Injection 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 242519 Removing And Installing Air Cleaner Housing >> Installing Air Cleaner Housing

Installing Air Cleaner Housing

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten screws securing air cleaner housing to carrier module > Tightening torque 4.5 Nm (3.25 ftlb.) 

    Tighten screw-type clamps securing air-cleaner cowl to air cleaner > Tightening torque 5 Nm (3.5 ftlb.) 

scientia non olet · About LEMON Manuals