Installing Exhaust Flap Actuator
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Install exhaust flap actuator.
- 1.1 Move exhaust flap actuator -2-
into installation position.
- 1.2 Fit and tighten screws -3-
.
> Tightening torque 5 Nm (3.5 ftlb.)
- 1.3 Plug in and lock cable plug -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Exhaust flap actuator