Installing Heat Shield For Rear Bumper
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Install heat shield for rear bumper.
- 1.1 Move heat shield for rear bumper -3-
into installation position.
- 1.2 Fit and tighten nuts -1-
and screw -2-
.
Nuts -1-
: > Tightening torque 9 Nm (6.6 ftlb.)
Screw -2-
: > Tightening torque 2.5 Nm (1.8 ftlb.)
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Heat shield for rear bumper, left