LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (26 Exhaust System 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 261219 Removing And Installing Heat Shield For Turbocharger (V6 Turbo) >> Installing Heat Shield For Turbocharger

Installing Heat Shield For Turbocharger

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install heat shield for turbocharger.
    1. 1.1 Tighten screws to > Tightening torque 9 Nm (6.5 ftlb.)  .
    2. 1.2 Tighten ball pin to > Tightening torque 4.8 Nm (3.5 ftlb.)  .
scientia non olet · About LEMON Manuals