Group 13 - Engine - Crank Drive, Pistons: Crankshaft

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankshaft Bearing Covers Screws Tightening Sequence

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tightening sequence for crankshaft bearing covers

1 to 8	Screws for crankshaft bearing covers/replace > Initial tightening 30 Nm (22.1 ftlb.) > Torque angle + 90°
9	Screws for crankshaft bearing covers, side/replace > Tightening torque 20 Nm (14.8 ftlb.) > Torque angle + 90°