Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Vibration damper to crankshaft | Replace screw | Initial tightening, Step 1 | 50 Nm (37 ftlb.) | ||
| Vibration damper to crankshaft | Replace screw | Initial tightening, Step 2 | 100 Nm (74 ftlb.) | ||
| Vibration damper to crankshaft | Replace screw | Final tightening | 180 Grad | ||
| Screws securing brace to crankcase | Item X | Tightening torque | 23 Nm (17 ftlb.) | ||
| Screws securing brace to crankcase | Item X | Tightening torque | 23 Nm (17 ftlb.) |