Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| V-band clamp securing primary catalytic converter to catalytic converter | Tightening torque | 15 Nm (11 ftlb.) | +/- 2 Nm (1.5 ftlb.) | ||
| Fastening screw securing holder to catalytic converter | M8 x 20 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Fastening screw securing holder on bank 1 to transmission | Tightening torque | 23 Nm (17 ftlb.) | |||
| Ball clamp securing exhaust system to catalytic converter | Tightening torque | 35 Nm (26 ftlb.) |