Installing Exhaust System

1. 1.1 Position exhaust system on a transmission jack and secure it with a tension strap -arrows-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Securing exhaust system on transmission jack (similar to illustration)

> Tightening torque 23 Nm (17 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear silencer holders (figure shows V8 Turbo)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosening decoupling elements

1. 4.1 Fit and tighten screws -4-  on transmission support holders -3-  .

   > Tightening torque 23 Nm (17 ftlb.) 

2. 4.2 Attach new ball clamps -2-  to the connection between the catalytic converters and front silencer.
   1. 4.2.1 Tighten ball clamps -2-  .

      > Tightening torque 35 Nm (26 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Exhaust system on transmission support

1. 5.1 Fit and tighten screws -1-  .

   > Tightening torque 23 Nm (17 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Centre exhaust system mount

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Vacuum hose for exhaust system

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Actuator for exhaust flap

> Tightening torque 23 Nm (17 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Exhaust system (figure shows V8 Turbo)

1. 9.1 Fit and tighten screws -1 and 2-  .

   > Tightening torque 50 Nm (37 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Tunnel strut