Removing Front Anti-Roll Bar

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for PDCC wire harness

1. 1.1 Unscrew fastening screw for ground line -2-  .
2. 1.2 Loosen bracket -3-  .
3. 1.3 Release and disconnect electric plug connections from the PDCC control unit in the sequence -1- to 5-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Sequence for disconnecting the electric plug connections

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for connecting link for anti-roll bar

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for anti-roll bar clamps

1. 3.1 Unscrew fastening screws -2-  .