Removing Anti-Roll Bar Mount

Only for e-Hybrid vehicles: Loosen high-voltage line brackets.

1.3 Open tie-wrap -3- and remove high-voltage line brackets from front-axle carrier.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holder for high-voltage lines on anti-roll bar mount

Only for e-Hybrid vehicles: Unclip cable holder for high-voltage lines -1- from anti-roll-bar mount.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cable holder for high-voltage lines on anti-roll bar mount

Only for e-Hybrid vehicles: Disconnect electric lines for steering -1- and transmission -2- at the anti-roll bar mount -3- .

3.1 Unclip electric line for steering -1- at -items A- on the anti-roll bar mount -3- .

3.2 Unclip electric line for transmission -2- at -items B- on the anti-roll bar mount -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric lines on anti-roll bar mount on e-Hybrid vehicle

Not for e-Hybrid vehicles: Disconnect electric line for steering -1- and transmission -2- at the anti-roll bar mount -3- .

4.1 Unclip electric line for steering -1- at -items A- on the anti-roll bar mount -3- .

4.2 Unclip electric line for transmission -2- at -items B- on the anti-roll bar mount -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric lines on anti-roll bar mount

Remove strut -1- on both sides of the vehicle.

5.1 Unscrew screws -2 and 3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Strut mounting

Loosen anti-roll bar mount -1- at the sides.

6.2 Only at the left (RHD vehicles)/only at the right (LHD vehicles): Unscrew screw -3- and counter at the nut on the steering gear at the same time.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Anti-roll bar mount at the sides

Loosen anti-roll bar mount -1- at the front and rear.

7.2 Unscrew screws -3- on the body.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Anti-roll bar mount at front and rear

Carefully guide anti-roll bar mount -1- down and out -arrow A- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing anti-roll bar mount