Removing Pdcc Control Unit

Information 

• Some repairs are shown on the front PDCC control unit. 
• The steps required for the rear PDCC control unit are identical. 

1. Unscrew screw -1-  and remove ground lines -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Disconnecting ground lines

   Information 

   Observe specified sequence for disconnecting the electric plug connections.

   Sequence corresponds to the numbers (1-5).

2. Release and disconnect electric plug connections -1-  and -2-  (-arrows-  ).

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Disconnect the electric plug connections

3. Release and disconnect electric plug connections -3-  to -5-  (-arrows-  ).

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Disconnect the electric plug connections

4. Only for rear PDCC control unit  :
   1. 4.1 Unclip line bracket -1-  .

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Unclipping line bracket

   2. 4.2 Unscrew screws -1-  and -2-  and remove PDCC control unit -3-  with holder.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing front PDCC control unit with holder

5. Only for front PDCC control unit: 
   1. 5.1 Unscrew screw -1-  and screw off nuts -2-  .
   2. 5.2 Remove PDCC control unit -3-  with holder.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing rear PDCC control unit with holder (illustration shows front PDCC control unit)

6. Unscrew screws -1-  and remove PDCC control unit -2-  from the holder.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing PDCC control unit