Subsequent Work

Install deflector plate for electric machine.
> WM, 279319 REMOVING AND INSTALLING HIGH-VOLTAGE LINE FROM POWER ELECTRONICS TO ELECTRIC MOTOR
Install primary catalytic converter.
> 267619 REMOVING AND INSTALLING PRIMARY CATALYTIC CONVERTER (V6 BITURBO)
Install underbody panelling.
> WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY
Secure universal joint.
> 481519 REMOVING AND INSTALLING STEERING COLUMN
Install rear part of wheel housing liner front at the left.
> WM, 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER
Install the wheel.
> 440519 REMOVING AND FITTING WHEEL
Perform characteristic adaptation of decoupler using PIWIS Tester .
1. 7.1 Select control unit for engine electronics (DME) .
2. 7.2 Select Maintenance/repairs
3. 7.3 Select Decoupler commissioning .
4. 7.4 Select decoupler characteristic adaptation .
5. 7.5 Follow the instructions and information on the Tester.
6. 7.6 Perform characteristic adaptation as per menu guidance.
Perform decoupling commissioning using PIWIS Tester .
1. 8.1 Select control unit for engine electronics (DME) .
2. 8.2 Select Maintenance/repairs
3. 8.3 Select Decoupler commissioning .
4. 8.4 Select Decoupler commissioning after part replacement .
5. 8.5 Follow the instructions and information on the Tester.
6. 8.6 Perform commissioning according to menu guidance.
Test drive.