LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 85 (74 Seat Cushions, Seat Covers - Wagon -- 971 - PANAMERA (971)) >> WM, 745619 Removing And Installing Lock For Load-Through System >> Installing Lock For Load-Through Provision

Installing Lock For Load-Through Provision

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten screws securing load-through provision lock to load-through provision > Tightening torque 20 Nm (15 ftlb.) +/- 2 Nm (1.5 ftlb.) 

    Screw in and tighten screw securing cover to load-through provision lock > Tightening torque 1.5 Nm (1 ftlb.) 

scientia non olet · About LEMON Manuals