Removing Cover For Rear Backrest
WARNING: This page is about a different variant/trim than selected.
- Unclip frame on backrest locking mechanism -1-
.
Unclipping frame on backrest locking mechanism
- Detach cover for rear backrest using a plastic wedge all the way around -arrows-
.
Detaching cover for rear backrest all the way around
- Guide cover for rear backrest through towards the front in the headrest area -arrow-
.
Guiding cover for rear backrest through towards the front in the headrest area
- Detach cover for rear backrest at the lock -arrow-
.
Detaching cover for rear backrest at the lock
- Guide electric line -2-
through cover for rear backrest.
Disconnecting electric line
- Turn cover for rear backrest inside out towards the front.
- Cut cushion clips -b-
on cover for rear backrest -3-
.
Cutting cushion clips
- Detach cover for rear backrest -3-
at locking mechanism for rear backrest.
Detaching cover for rear backrest at locking mechanism for rear backrest
- 8.1 Detach cover for rear backrest -3- at the Velcro fasteners -4- .
- 8.2 Disengage tab on locking mechanism for rear backrest -5- .
- Fit cover for rear backrest over the headrest -arrows-
.
Fitting cover for rear backrest over headrest
- Remove cover for rear backrest -3-
.
Removing cover for rear backrest
- 10.1 Cut cushion clips -a- .
- 10.2 Remove cover for rear backrest -3- .