LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 84 (6X Body-Equipment Outside-General - Wagon -- 971 - PANAMERA (971)) >> WM, 6X00IN30 Working With Adhesive Tape And Adhesive Pads >> Adhesive Tape And Adhesive Pads On The Bodywork >> Processing Conditions

Processing Conditions

WARNING: This page is about a different variant/trim than selected.

During processing, the ambient and material temperature should be > Minimum 15°C  to > Maximum 25°C  .

scientia non olet · About LEMON Manuals