Technical Values - Retaining Strips
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Screw securing retaining strip to wing | Item 2 | Tightening torque | 2.8 Nm (2.1 ftlb.) | |
|
Screw securing retaining strip to wing |
||||
| Screws for retaining strip under headlight | Item 2 | Tightening torque | 5.5 Nm (4.1 ftlb.) | |
|
Screws for retaining strip under headlights |
||||
| Screws for rear retaining strip side | Item 1 | Tightening torque | 3.5 Nm (2.6 ftlb.) | |
|
Screws for rear retaining strip at the sides |
||||
| Nut on retaining strip for tail light | Item 7 | Tightening torque | 3.5 Nm (2.6 ftlb.) | |
|
Nuts for holder with heat protection |
||||
| Nuts on centre retaining strip | Item 1 | Tightening torque | 6 Nm (4.4 ftlb.) | |
|
Nuts on centre retaining strip |
||||
| Nut on centre retaining strip bottom | Item 1 | Tightening torque | 3.5 Nm (2.6 ftlb.) | |
|
Nut on centre retaining strip at the bottom |
||||
| Screw for retaining strip with heat protection | Item 5 | Tightening torque | 2.5 Nm (1.8 ftlb.) | |
|
Screw for retaining strip on rear light |
||||
| Nut on retaining strip with heat protection | Item 6 | Tightening torque | 9 Nm (6.6 ftlb.) | |
|
Nuts for holder with heat protection |
||||