Preparing Window Aperture For Installation

Information 

• The surface coating of adhesive residue helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution. 

1. When removing adhesive residue with a cutter -C-  and flashing knife -D-  on the body, ensure that a surface coating of adhesive remains.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing adhesive residue on rear lid

   Information 

   • A drying time of 10 minutes must be observed between cleaning the bonding surface and applying primer! Remove all cleaning solution residue on the body. 
2. Clean new paint surfaces or damage to the top coat paint in the non-visible area of the window aperture in the body with cleaning solution -H1-  and touch up with primer -H2-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cleaning and touching up paint surfaces and damaged areas