LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 81 (66 Exterior Equipment - Wagon -- 971 - PANAMERA (971)) >> WM, 667919 Removing And Installing Rear-View Mirror Housing (Lower Part) >> Installing Rear-View Mirror Housing (Lower Part)

Installing Rear-View Mirror Housing (Lower Part)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Tighten screws on rear-view mirror housing (lower part) to > Tightening torque 0.55 Nm (0.4 ftlb.) +/- 0.25 Nm (0.15 ftlb.)  .
    2. 1.2 Tighten screws on trim panel for mirror base to > Tightening torque 0.55 Nm (0.4 ftlb.) +/- 0.25 Nm (0.15 ftlb.)  .
scientia non olet · About LEMON Manuals