Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Rear spoiler (wing) to rear spoiler (H13) | Gap dimension | 3.5 mm | +/- 0.5 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) to rear spoiler (H14) | Gap dimension | 0.5 mm | +/- 0.5 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) to rear spoiler (H15) | Gap dimension | 3.5 mm | +/- 0.8 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) to rear spoiler (H16) | Gap dimension | 0.5 mm | +/- 0.5 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) to rear spoiler (H17) | Gap dimension | 3.5 mm | +/- 0.5 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) to rear spoiler (H18) | Running gap dimension | Gap dimension | 0.5 mm - 0.3 mm | +/- 0.4 mm | |
|
Gap dimension |
|||||
| Rear lid to roof/P-roof (R7) | Gap dimension | 4.8 mm | + 1 mm | - 0.2 mm | |
|
Gap dimension |
|||||
| Rear lid to roof/P-roof (R8) | Gap dimension | - 2 mm | +/- 0.8 mm | ||
|
Gap dimension |
|||||
| Rear lid to side panel (R9) | Gap dimension | 4 mm | +/- 0.7 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) | Item 1 | Tightening torque | 6 Nm (4.4 ftlb.) | ||
|
Rear spoiler (wing) |
|||||