LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 81 (66 Exterior Equipment - Wagon -- 971 - PANAMERA (971)) >> WM, 66471930 Removing And Installing Moulding For Rear Lid >> Installing Moulding For Rear Lid >> Rear Lid Moulding

Rear Lid Moulding

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.
  2. Tighten screw to > Tightening torque 4 Nm (3 ftlb.)  .