LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 81 (66 Exterior Equipment - Wagon -- 971 - PANAMERA (971)) >> WM, 660719 Removing And Installing Front Logo >> Installing Front Logo

Installing Front Logo

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for nut on front logo: > Tightening torque 1.3 Nm (1 ftlb.) - 0.2 Nm (0.1 ftlb.) 

scientia non olet · About LEMON Manuals