LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (42 Rear Wheel Suspension Drive Shaft 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 425219 Removing And Installing Wheel Bearing Housing >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove the relevant hub cap using > 9229/1 - puller hook  and loosen axle nut -1-  before raising the vehicle. Operate the brake while doing this (2nd mechanic required).
    G15860657Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Axle nut (front axle shown)

  2. Remove rear brake disc.

    > Refer to the appropriate Service Information for Removing and installing rear brake disc

    > 465419 REMOVING AND INSTALLING REAR PCCB BRAKE DISC

scientia non olet · About LEMON Manuals