Removing Brake Booster Vacuum Pump
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Hot components
- Risk of burns
→ Let hot components cool down.
→ Wear personal protective gear.
- Open clamp -2-
, pull off charge air hose -3-
and set it aside.
Setting charge air hose aside
- Unscrew screws -4-
and pull holder -5-
over brake booster vacuum pump with electric lines as far forward as required until the hose connection is accessible.
Loosening holder
- Disconnect plug connection -6-
and move brake booster line -7-
aside.
Moving brake booster line aside
- Disconnect vacuum hose -8-
from brake booster vacuum pump.
Disconnecting vacuum hose
Information
Place a suitable cloth underneath to catch escaping oil when pulling off the vacuum pump.
- Unscrew screws -9-
and remove brake booster vacuum pump -1-
.
Removing brake booster vacuum pump