Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws securing engine carrier to engine | M10 x 45/replace | Initial tightening | 50 Nm (37 ftlb.) | ||
| Screw securing engine carrier to engine | Final tightening | + 90° | |||
| Fastening screw for torque support bracket | M8 x 55/(V6 Turbo M8 x 45) | Tightening torque | 23 Nm (17 ftlb.) | ||
| Screw securing heat shield to high-pressure pump | M6 x 12 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw securing heat shield to high-pressure pump | M6 x 25 | Tightening torque | 9 Nm (6.5 ftlb.) |