LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 44 (15 Engine - Cylinder Head, Valve Drive 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (V8 BITURBO) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove engine cover (design cover).

    > REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V8 BITURBO)

  2. Remove front trim panel (engine compartment).

    > Removing and installing front trim panel (engine compartment) 

  3. Only when removing solenoid hydraulic valve for valve lift adjustment on outlet side of cylinder 2: 

    Remove (right) oil mist separator.

    > REMOVING AND INSTALLING (RIGHT) OIL MIST SEPARATOR (V8 BITURBO)

scientia non olet · About LEMON Manuals