LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 37 (17 - Engine - Lubrication 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 170519 Removing And Installing Oil Pressure Switch (V8 BITURBO) >> Installing Oil Pressure Switch

Installing Oil Pressure Switch

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order.
  2. Replace sealing ring.
  3. Screw in and tighten oil pressure switch > Tightening torque 20 Nm (15 ftlb.) 
  4. Screw in and tighten screws in heat shield > Tightening torque 9 Nm (6.5 ftlb.) 
scientia non olet · About LEMON Manuals