Removing Switch For Height And Fore-And-Aft Adjustment
WARNING: This page is about a different variant/trim than selected.
Information
The switch for height and fore-and-aft adjustment is located on the underside of the steering column casing.
- Loosen switch for height and fore-and-aft adjustment -2-
.
- 1.1 Insert screwdriver -1- into the slit.
- 1.2 Press clip back using the screwdriver -1- .
- 1.3 Pull switch for height and fore-and-aft adjustment -2- away in a downward direction -arrow- .
Loosening switch for height and fore-and-aft adjustment
- Release electric plug connection -1-
and pull it off -arrow-
.
Releasing and pulling off electric plug connection