Installing Steering Column Casing
WARNING: This page is about a different variant/trim than selected.
- Installation is performed in reverse order. Pay particular attention to the following:
Tightening torque for screws for instrument cluster trim panel: > Tightening torque 1.5 Nm (1 ftlb.)
Tightening torque for screws at the top of the steering column: > Tightening torque 3 Nm (2 ftlb.)
Tightening torque for screw at the bottom of the steering column: > Tightening torque 1.5 Nm (1 ftlb.)