Overview Of Shield For High-Pressure Pump

WARNING: This page is about a different variant/trim than selected.

1	Shield
2	Crash support
3	Screws PT 7 x 22 > Tightening torque 14 Nm (10.3 ftlb.)
4	Screw, M6 x 12 > Tightening torque 8 Nm (5.9 ftlb.)
5	Screw, M6 x 25 > Tightening torque 8 Nm (5.9 ftlb.)

Location	Description	Type	Basic value
Fastening screws for ground lines for left cylinder head	Item 1	Tightening torque	9 Nm (6.6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Fastening screws for ground lines for left cylinder head
Ground line for right cylinder head	Item 1		9 Nm (6.6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Ground line for right cylinder head
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Ground line for right cylinder head, bottom