Preliminary Work
WARNING: This page is about a different variant/trim than selected.
WARNING:
Incorrect handling of high-voltage components
- Electric shock
- Short circuit
- Fire
- Explosion
→ Only appropriately trained and authorized persons may work on high-voltage vehicles and components.
→ Required qualification: High voltage technician or high voltage expert.
→ Observe national requirements and legislation for this work
→ Always use insulated tools, such as an > VAS 6883 - insulated tool set when working on these parts.
→ Observe general warning notices for working on the high-voltage system.
→ 2X00IN General warning notices for working on the high-voltage system
- Observe warning notes.
> 2X00IN GENERAL WARNING NOTES FOR WORKING ON THE HIGH-VOLTAGE VEHICLE ELECTRICAL SYSTEM
- Isolate the high-voltage system from the power supply and complete the relevant documentation.
- Perform function test on test adapter.
> WM, 2X00IN FUNCTION TEST ON HIGH-VOLTAGE TEST ADAPTER
High-voltage charger, 7.2 kW
High-voltage charger (7.2 kW)
1 High-voltage connection for electric passenger compartment heater 2 High-voltage connection for air-conditioning compressor 3 High-voltage connection for high-voltage battery (E-box) 4 volt connection 5 High-voltage connection for charging socket High-voltage charger, 3.6 kW
High-voltage charger (3.6 kW)
1 High-voltage connection for electric passenger compartment heater 2 High-voltage connection for air-conditioning compressor 3 High-voltage connection for high-voltage battery (E-box) 4 12-volt connection 5 High-voltage connection for charging socket