LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (15 Engine - Cylinder Head, Valve Drive 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 153919 Removing And Installing Camshaft Controller Actuator (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Only for installing camshaft controller actuator at intake side of the right cylinder bank: 

    Fill in coolant.

    > Refer to Draining and filling coolant (includes bleeding)  in the appropriate service information.

  2. Install heat shield for turbocharger.

    > Refer to Removing and installing heat shield for turbocharger (V6 Turbo)  in the appropriate service information.

  3. Install engine cover (design cover).

    > Refer to Removing and installing engine cover (design cover) (V6 biturbo)  in the appropriate service information.

scientia non olet · About LEMON Manuals