LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (21 Exhaust Gas Turbocharging 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 212419 Removing And Installing Intake Manifold (V6 BITURBO) >> Installing Intake Manifold

Installing Intake Manifold

WARNING: This page is about a different variant/trim than selected.
  1. install intake manifold.
    1. 1.1 Check intake manifold seal and replace it if damaged.
    2. 1.2 Tighten screws securing intake manifold to turbocharger to > Tightening torque 9 Nm (6.5 ftlb.)  .
    3. 1.3 Tighten screw-type clamp to > Tightening torque 3.5 Nm (2.5 ftlb.)  .
  2. Further installation is performed in reverse order.
scientia non olet · About LEMON Manuals