LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (47 Brakes - Brake Hydraulic System, Regulator, Booster 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 471519 Removing And Installing Brake Master Cylinder >> Installing Brake Master Cylinder

Installing Brake Master Cylinder

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Replace O-ring for brake master cylinder on brake booster.
    2. 1.2 Check that the brake master cylinder actuator is fitted correctly. Screw in screws evenly to prevent tilting.
    3. 1.3 Screws securing brake master cylinder to brake booster >Tightening torque 22 Nm (16 ftlb.)  .
    4. 1.4 Union nuts on brake lines >Tightening torque 18 Nm (13 ftlb.)  .
scientia non olet · About LEMON Manuals