LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (10 Engine - Crankcase, Suspension 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 105519 Removing And Installing Oil Mist Separator (V6 Turbo) >> Removing Oil Mist Separator

Removing Oil Mist Separator

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press release button on both sides -arrow A-  and loosen adapter -1-  on the oil mist separator.
    G15821331Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening adapter on oil mist separator

  2. Press vacuum hose aside.
  3. Remove oil mist separator -1-  .

    Information 

    Screws on the oil separator are permanently connected. If screws are damaged, press the screws out of the oil separator and replace them.

    1. 3.1 Loosen screws -2 to 7-  .
    2. 3.2 Remove oil mist separator -1-  .
    Fig 1: Oil Mist Separator Screws Loosening Sequence
    G15821332Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing oil mist separator