LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (10 Engine - Crankcase, Suspension 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 103719 Removing And Installing Torque Support >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Screw, torque support replace Initial tightening 50 Nm (36.9 ftlb.)    
Screw, torque support   torque angle + 90°    
Side strut to body Hexagon-head bolt, M8 x 45/always replace bolts following removal Initial tightening 20 Nm (15 ftlb.)    
Side strut to body Hexagon-head bolt, M8 x 45/always replace bolts following removal Final tightening + 90°