Technical Values
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Screw on guide tube for oil dipstick | Replace O-ring. | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screws on crankcase cover | Replace following removal. | Initial tightening | 3 Nm (2 ftlb.) | ||
| Screws on crankcase cover, on belt side | Replace following removal. | Final tightening | + 90° | ||
| Screws on crankcase cover in oil guide housing | Replace following removal. | Final tightening | 9 Nm | ||
| Screw securing tensioning roller for air-conditioning compressor to air-conditioning compressor bracket | Tightening torque | 25 Nm (19 ftlb.) | |||
| Aluminium screw securing air-conditioning compressor bracket to crankcase | Replace following removal. | Initial tightening | 8 Nm (6 ftlb.) | ||
| Aluminium screw securing air-conditioning compressor bracket to crankcase | Replace following removal. | Final tightening | + 90° | ||
| Screws for control valve holder | Tightening torque | 9 Nm (6.5 ftlb.) |