Subsequent Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fit new crankshaft sealing ring.
> Removing and installing crankshaft sealing ring
Install air-conditioning compressor bracket -5- .
1. 2.1 Replace screws on air-conditioning compressor bracket.
2. 2.2 Position air-conditioning compressor bracket -5- .
3. 2.3 Fit new screws for air-conditioning compressor bracket -4- and tighten to > Initial tightening 8 Nm (6 ftlb.) and > Final tightening + 90° .
4. 2.4 Install tensioning roller -3- .
  1. 2.4.1 Position tensioning roller -3- .
  2. 2.4.2 Fit screw on tensioning roller -2- and tighten to > Tightening torque 25 Nm (19 ftlb.) .
  3. 2.4.3 Fit dust boot -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Air-conditioning compressor bracket
Install air-conditioning compressor.
> Removing and installing air-conditioning compressor
Install vibration damper.
> Removing and installing crankshaft vibration damper
Install oil guide housing.
> Removing and installing oil guide housing (V6 Turbo)