Removing Crankcase Cover

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew screws on holder for change-over valve -1- and move holder -2- aside.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connection holder
Remove guide for oil dipstick -2- .
1. 2.1 Unscrew screw on guide for oil dipstick -1- .
2. 2.2 Pull guide for oil dipstick -2- out of the crankcase cover.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil dipstick
Remove crankcase cover -18- .
1. 3.1 Unscrew screws on crankcase cover -1 to 17- .
2. 3.2 Screw a screw for the crankcase cover -18- into each of the threaded bores -Arrows- by hand.
3. 3.3 Tighten screws carefully and uniformly in order to loosen the crankcase cover -18- from the bonding.
4. 3.4 Remove crankcase cover -18- and remove screws from the threaded bores -Arrows- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Crankcase cover