Installing Brake Pedal

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

The cover on the pedal shaft -1- is coded and can only be fitted at the correct installation position.

Check that the lugs on the cover are engaged in the cut-outs in the base of the pedal.

This is the only way to ensure that the pedal shaft is installed at the correct position and will not turn.

Do not grease the pedal shaft -1- !

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pedal shaft

1	Install brake pedal with pedal shaft.
2	Insert push rod into brake pedal.