Technical Values For Underbody Cover

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value
Screws for cover on front underbody	Item 1	Tightening torque	2.5 Nm (1.75 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Screws for cover on front underbody
Nuts for cover on front underbody	Item 2	Tightening torque	2.5 Nm (1.75 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Nuts for cover on front underbody
Screws for tunnel cover on centre underbody	Item 1	Tightening torque	2.5 Nm (1.75 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Screws for tunnel cover on centre underbody cover
Nuts for tunnel cover on centre underbody cover	Item 2	Tightening torque	2.5 Nm (1.75 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Nuts for tunnel cover on centre underbody cover
Nuts for centre underbody cover (at the sides)	Item 4	Tightening torque	2.5 Nm (1.75 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Nuts for centre underbody cover (at the sides)
Screws for centre underbody cover (at the sides)	Item 5	Tightening torque	2.5 Nm (1.75 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Screws for centre underbody cover (at the sides)
Nuts for rear underbody cover	Item 2	Tightening torque	2.5 Nm (1.75 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Nuts for rear underbody cover
Screws for rear underbody cover	Item 3	Tightening torque	2.5 Nm (1.75 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Screws for rear underbody cover