Installing ATF Pan

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Clean the sealing surface on the transmission.
Install ATF pan -1- .

Fig 1: ATF Pan Screws Tightening Sequence
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing ATF pan
1. 2.1 Clean sealing face on the ATF pan.
2. 2.2 Replace seal on ATF pan -1- .
3. 2.3 Fit ATF pan -1- .
4. 2.4 Screw in and tighten new screws in the specified sequence -2 to 14- .
  > Initial tightening 3 Nm (2 ftlb.)
  
  > Torque angle 60°