Installing Selector Knob
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Fit selector knob and position the sliding covers -4-
(-arrows-
).
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Positioning sliding covers
- Screw in and tighten screw > Tightening torque 2.5 Nm (1.75 ftlb.)
- The remaining installation steps are performed in reverse order.