LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (40 Wheel Suspension Front Drive Shaft 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 408519 Removing And Installing Front Spring Strut >> Preliminary Work >> Preparatory Work

Preparatory Work

WARNING: This page is about a different car, the 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove header tank panel cover.

    > WM, 852219 REMOVING AND INSTALLING PLENUM PANEL COVER COUPE or WM, 852219 REMOVING AND INSTALLING PLENUM PANEL COVER WAGON

  2. Remove front underbody cover.

    > WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY

  3. Remove front wheel bearing housing.

    > WM, 405019 REMOVING AND INSTALLING WHEEL BEARING HOUSING 

  4. Only for the right drive shaft:  Remove front axle support, rear section.

    > WM, 400819 REMOVING AND INSTALLING FRONT-AXLE SUPPORT