Catalytic Converter (Monoturbo)

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Catalytic Converter Components Location With Torque Specification (Monoturbo)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Catalytic converter (monoturbo)

1	Primary catalytic converter
2	V-band clamp/replace > Tightening torque 7 Nm (5 ftlb.) +/- 1 Nm (0.5 ftlb.)
3	Seal/replace
4	Support
5	Screw, M8 x 20 > Tightening torque 23 Nm (17 ftlb.)
6	Holder
7	Screws, M8 x 30 > Tightening torque 23 Nm (17 ftlb.)
8	Insulation
9	Screws, M8 x 20 > Tightening torque 23 Nm (17 ftlb.)
10	Catalytic converter
11	Nuts/replace > Tightening torque 23 Nm (17 ftlb.)
12	Seal/replace
13	Ball clamp > Tightening torque 35 Nm (26 ftlb.)