Battery Handling Instructions
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Battery terminals do not need to be greased.
- The battery terminal clamps should only be attached by hand - without excessive force - to prevent damage to the battery.
- The tightening torque for the battery terminals is > Torque 6 Nm (4.5 ftlb.) .
- If the battery is reconnected, proceed according to
> WM, 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY