Installing Battery
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order.
- Screw in and tighten screws in battery rail > Tightening torque 8 Nm (6 ftlb.)
- Screw in and tighten screws in battery retaining bar > Tightening torque 8 Nm (6 ftlb.)
- Tighten terminal clamps.
> Tightening torque 3.5 Nm (2.5 ftlb.)
> Tightening torque 3.5 Nm (2.5 ftlb.)