Removing Battery Sensor

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Voltage peaks

Risk of damage to electrical load or to the control unit
→ Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).

→ Switch off electrical loads before disconnecting or removing them.

Disconnect the negative cable -1- on the battery.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing terminal clamps
Release and disconnect electric plug connection at the battery sensor.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disconnecting electric plug connection
Loosen fastening screws on cover strip -1- and remove cover strip.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing cover strip
Screw off fastening nut for ground line -1- on the body and remove ground line and battery sensor.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrewing ground line