LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (21 Exhaust Gas Turbocharging 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 216719 Removing And Installing Bypass Flap Control Box (V6 MONOTURBO) >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Adjustment travel for control rod Vacuum at 165 - 175 mbar Set-point value 8 mm +/- 1 mm  
Adjustment travel for control rod at a vacuum of 95 - 105 mbar Set-point value 3 mm +/- 1 mm  
Nut vacuum modulator M6 Tightening torque 8 Nm (5.9 ftlb.)    
Lock nuts on control rod   Tightening torque 8 Nm (5.9 ftlb.)