Installing Pressure Pipe
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1 Fit new seal on pressure pipe -1-
.
- 1.2 Screws -4-
> Tightening torque 9 Nm (6.5 ftlb.)
.
- 1.3 Screw-type clamp on pressure hose -2-
> Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.4 ftlb.)
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Pressure pipe