LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (21 Exhaust Gas Turbocharging 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 213019 Removing And Installing Turbocharger (V6 MONOTURBO) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install oxygen sensor.

    > Removing and installing oxygen sensor upstream of catalytic converter (V6 monoturbo) 

  2. Install pressure pipe.

    > WM, 214119 REMOVING AND INSTALLING PRESSURE PIPE (V6 MONOTURBO) 

  3. Install intake pipe.

    > WM, 212419 REMOVING AND INSTALLING INTAKE MANIFOLD (V6 MONOTURBO) 

  4. Fill in coolant and bleed the cooling system.

    > WM, 193817 DRAINING AND FILLING COOLANT

  5. Install heat shield for turbocharger.

    > Removing and installing heat shield for turbocharger (V6 biturbo and monoturbo) 

  6. Install engine cover (design cover).

    > WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)

scientia non olet · About LEMON Manuals